Well, even though neither Motorola tech support, Verizon tech support, nor Pharos were able to help, I finally figured out how to get my Motorola Q to recognize and utilize my Pharos iGPS-BT. (Incidentally, both Pharos and Motorola were helpful and apologetic when I communicated with them.) Here’s the step-by-step:
- Turn on the iGPS-BT.
- If it’s not on already, turn on the Q.
- Turn on Bluetooth on the Q. (Start, Bluetooth, Bluetooth Manager, Settings, Set to “Bluetooth ON”)
- While in the Settings Menu, hit the Right soft key (Menu), select “Paired Devices”
- In the Paired Devices screen, hit the Right soft key (Menu), select “Search for Devices”, then while it’s searching, hit the Right soft key (Menu) again and select “Show All Devices”. Your Q should find the iGPS-BT (Or other GPS device). Select the device.
- Enter your device’s pin, for the iGPS-BT it’s 12345678.
- Now fire up your favorite GPS enabled application. If you don’t have one, Virtual Earth Mobile (http://blogs.msdn.com/windowsmobile/archive/2006/06/27/649384.aspx) is a cool free mapping application. It doesn’t do auto-updates for a moving map experience, but it can get your current location from a GPS.
- Configure your GPS COM port. The trick here is to select COM1:. Evidently COM1 is reserved for Bluetooth COM ports on the Q. Might be similar to other Smartphones, but I never found this.
- When your application attempts to open the COM port, the Q will display a message saying that an application is attempting to open a Bluetooth Serial Port, and asking if you want to select a device. Hit the Left soft key (Yes), and then select your Bluetooth GPS from the list.
That’s it! 9 easy intuitive steps is all it takes! If you have any difficulties, feel free to leave a comment here and I’ll try my best to help.